Sound System Documentation

Documentation on how to operate the sound systems and how things are laid out.

Operation

System operation is simplified currently while the normal mixer is non-functional.

Start-up Sequence

1. Turn on the Media Computer
   • This is the black computer tower in the Booth under and to the left of the Mixer.
2. Turn on the power in the Sound Booth
   • This is the top JuiceGoose in the rack under the mixer
3. Turn on the Amps
   • This is the 3rd item in the rack under the mixer. It is a rotary knob turning it to the “up” position will sequence on the Amps.
4. Begin using
   • All inputs and outputs are labeled
   • Using settings at “Unity” or 0 for the channel faders is typically a good place to start.

Shut-Down Sequence

1. Turn off the Amps.
   • The 3rd item from the top in the rack under the mixer
   • Turn the rotary knob “down” and wait for the bottom light to come on.
2. Turn off the top JuiceGoose in the rack under the mixer
3. Turn off any other componenets used

Mixer Set-up

• The current mixer we are using is an Allen-Heath 24 channel mixer.
• Inputs are clearly labeled on each channel.
• Outputs
  • Main R goes to the Hearing Assistance system
  • Main L goes to the Nursary
  • Mono out goes to the Main speakers
  • Aux 3 goes to the “stage” speakers, including the speakers flown from the celing, the Stage Monitors, Piano monitor, and Organ monitor.
  • Aux 4 goes to the Streaming Computer